/
/
/
/
Like Us On Facebook
BELONG
LIMITED EDITION
The first Chario product made in Corian® offers the opportunity to be machined to the lathe like wood and in any shape. It is a composite material made of 2/3 of aluminum hydroxide (trihydrate) and 1/3 of acrylic resin (polymethylmethacrylate) with possible addition of colored pigments. It is also called “acrylic stone”.
WILL BE PRESENTED: November 2017
DESIGNED: Fiume13 Design
MATERIAL: Corian, Massive Wood
DESIGNED: Fiume13 Design
MATERIAL: Corian, Massive Wood
/
/
/
The complexity in creating a speaker system is focused mainly on achieving a certain result, which should not be randomly achieved through the assembly of various technologies, but achieved by pursuing a specific path while ensuring that every detail is specifically designed and constructed so that each detail interacts with all the others to achieve the set objective. That’s why a special dome membrane has been studied for this line. This tweeter size is our focal point in terms of design. Both driver and membrane have been modified to achieve an high performance, the new Softdome membrane grant an accuracy of performances respecting Chario philosophy. A two-way bookshelf systems usually place the tweeter in the uppermost region of the speaker’s cabinet. If the designer is also aiming for synchronization of the two transducers, the plinth must be given a suitable back tilt. Belong Type S inverts this principle by affixing the tweeter below.
/
/
/
The Material
/
/
Corian® is resistant to direct sunlight and its color remains substantially unchanged over time. It resists normal stresses. Being homogeneous throughout its thickness, it can be easily restored with surface abrasive treatments after accidental deterioration of cigarette burns or ink stains. It is heat-resistant on average, as long as it is not excessive. It is a translucent material or part of the light through the material
MANUFACTURING - PROUD TO BE PART OF THIS
Italians crafting and production
Each cabinet of Belong line is individually manufactured by a thermo-welding process, using heat can be shape at will in any form. This process makes also the interior surface free from any angle and is therefore suitable for avoiding any kind of sound reflection within the cabinet. Italian skills and technology combined to realize a unique creation. Video thanks to Italian Ministry of Economic Development.
HANDMADE IN ITALY SINCE 1975
The Cross Overs are made specifically for each speaker and are designed using the highest quality components. As all other components, they are entirely made in Italy the brain and soul of the whole speaker. The listening environment is considered the most influential factor for proper playback. The speaker system must be designed keeping in mind that the speaker will probably be used in a space free, or partially free, of sound field control.
/
/
/
/
/
Art is a human activity for which a person, by using certain external signs, consciously transmits the feelings experienced in other people, who in turn are left infected and try them/Lev Tolstoy
TECHNICAL DATA
Performance & Design
Drivers
1 tweeter 32mm – NdFeB motor
1 woofer 130mm Rohacell® – NdFeB motor
Sensitivity
87 dBSPL normalized to 1m/2.83Vrms decorrelated L/R pink noise / ITU-R BS 1116-1 compliant room
Low Frequency Cut Off
69Hz @ -3dB /4π sr referred to C4 WETS
Crossover Frequency
1550Hz @ -6dB (4th Order)
Suggested Amplifier
Up to 100W/8Ω Average Power
Rated Impedance
Modulus 8Ω (minimum 5.3Ω @230Hz) Argument +/- 36° (20Hz – 20kHz)
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |